10x
DURALUXE RE 150mm x 100mm Photo stand Horizontal
- Easy to clean
- Suitable for outdoor use, does not discolour due to UV rays
- Resistant to graffiti
- 5 year warranty
Disegnare
Concevoir
Ontwerp
Projetar
Diseñar
Entwürfen
| Direction: Horizontal |
| Coler: White Glossy |
Paper size
A4
Mirror image
Printer setting
Protective film
Remove protective film
Image print
Up
Temperature
200 °C
Time
100 sec.
Information
More information on aluminum panels for interior and exterior use.
DURALUXE
ATENTION
- The side to be printed is covered with a protective film. Before sublimation printing, remove it and clean the surface with alcohol or other degreaser.
- When these aluminum signs are sublimated with sublimation paper, sublimation printer and heat press from 3D PARATI, we offer 5 years warranty, but the lifespan and quality are much higher when using our materials. The warranty applies to both indoor and outdoor use!
Recommended settings and procedure
- Print in mirror image (see printer driver).
- Set the press to 200°C
- Remove the protective film from the aluminum plate.
- Take the sublimation paper printed with the print facing up.
- Place the aluminum plate on the paper with the side to be printed down. Secure the plate with heat tape.
- Press for 100 seconds.
- After pressing, immediately remove the sublimation paper and use heat-resistant gloves!
- Place the printed plate on a flat, cold plate to cool.
Je dynamische Snippet wordt hier weergegeven...
Dit bericht wordt weergegeven omdat je niet zowel een filter als een sjabloon hebt opgegeven om te gebruiken.